Model 140 Multi-Axis Coil Winder

Itasca Model 140 Multi-Axis Coil WinderItasca Automation Systems Model 140 multi-axis single spindle winder is one of the most durable and competitively priced coil winders in the industry, capable of performing the most complex programming requirements. The series 140 is part of Itasca's expanding line of winding equipment, including everything from bench models to complete dedicated systems.

Technical Data

Spindle Speed: 0-12,000 RPM (optional to 15,000 RPM)
Spindle Motor Power: Brushless Servo Motor
Spindle Stop Position: .45˚ increments – programmable 1 turn = 800 counts
Wire Size: 52 AWG, .020 mm – 14 AWG, 1.6 mm std.
Pitch Resolution: 0 to full traverse/turn
X Axis travel: 6.0" Speed: 500"/min.
Y Axis speed: 5.0" Speed: 500"/min.
Z Axis travel: 2.5" Speed: 500"/min.
Maximum Rotation Diameter: 6.0"
Power Supply: 220/440 VAC 60 HZ
Storage Capacity: 1.2 GB Hard Drive
Interface: RS-232 for printer, PC or dumb terminal, networkable
Monitor: 14" Color Super VGA
Keyboard: Standard 101 w/ track ball
Control: PC Based w/DSP motion control
I/O points: 24 each programmable
Dereeler control: 4 std. ports for hysteresis control
Wire Guide Assembly: 1 eyelet mtd. to bar, straight std., 90˚ - optional
Compressed air: 60 PSI required.
Dimensions: Dp: 36", W 40", H: 69"
Weight: 550 lbs.
Dead Posts: Wire Retention
Guard: Locking, Lexan

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 140 Multi-Axis Coil Winder, and may change due to design changes which may be incorporated.