Model 100L Programable Coil Winder

Itasca Model 100L Programable Coil WinderItasca Automation Systems Model 100L Programmable Coil Winder is perfect for companies requiring quick change over, program storage for multiple programs, job shops running multiple varieties of coils, or labs developing new coil proto-types. The model 100L is a fully programmable embedded PC, capable of performing the most complex programming requirements.

Technical Data

Spindle Speed: 0-12,000 RPM
Spindle Power: 1/2 HP optional
Motor-Spindle Ratio: 2.66 to 1 high, 1.263 to 1 low (optional to 1 to 2.486)
Spindle Stop Position: .45˚ increments-programmable 1 turn = 800 counts
Wire Size: 52 AWG .020mm - 16 AWG 1.3mm std.
Pitch Resolution: .00001 in. (.01 mils)
X Axis Travel: 3.2" (83.3 mm) std. 6" optional
X Axis Speed: 300"/minute max.(127 mm/sec)
X Axis Position Resolution: .001" (1 mil)
Maximum Rotation Diameter: 4.5" (114.3mm)
Tail Stock: Std. Closed: .75" - 4.75"(19mm-120.6mm) Max Open: 8.5" (215.9mm)
Power Supply: 120VAC 60HZ
Storage Capacity: 3500 lines of code
Interface: RS-232 for use with PC
Monitor: Backlit LCD display - 1/18" x 5.75" (30mm x 146mm) 4line x 40 CRT
Keyboard: Tactile Touch Membrane
I/O Points: Internal
Dereeler Ports: 2 Std. Programmable: Tension & Wire Break, (4 Optional)
Wire Guide Assembly: Eyelet or Pulley
Dimensions: 19"W (482mm) x 20"H (508mm) x 20DP (508mm)
Weight: 75 lbs. (34 kilos)
Guard: Programmable to initiate cycle start and stop
Programming: Menu-type (Or- Download from PC)
Foot Pedal Control: 1 Port Std. - (pedal optional)

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 100L Programmable Coil Winder, and may change due to design changes which may be incorporated.