Model 400-6 Multi-Spindle Coil Winder 6 Spindles
Model 400 -6 multi-axis coil winder is one of the most durable and competitively priced coil winders in the industry, capable of performing the most complex programming requirements.
The series 400-6 is part of Itasca's expanding line of winding equipment, that can be incorporated into a complete dedicated winding system.
Detail to your right: A close up detail of Model 400-6 heavy duty technology. The full equipment is pictured below with specifications.
- Shuttle Load/Unload
- Tumbler Tail Stock
- Programmable Dead Posts
- Wire Change
- 90º Wire Wrapº
- Heavy Duty Drive for 14 to 30 AWG
Spindle Speed: 0-15,000 RPM
Spindle Motor Power: 14 Ft. lbs. @ 6000 RPM 2.76 Hp.
Spindle Stop Position: 800 @ (.45º)
Wire Size: 52 AWG - 19 AWG
Pitch Resolution: 0 to full traverse / turn
X Axis Travel: 5.00" Speed: 500" / min.
Y Axis Travel: 4.75" Speed: 500" / min.
Z Axis Travel: 3.75" Speed: 500" / min.
Maximum Rotation Diameter: 3" (76.2mm)
Distance Between Center: 3" (76.2mm) Std.
Power Supply: 240/480 VAC,60 HZ, 3Ph
Storage Capacity: 10 GB Hard Drive
Interface: RS-232 for printer, PC Networkable
Monitor: 14" Color Super VGA
Keyboard: Standard 101
Control: PC Based w / DSP Motion Control - CoilPro
I/O Points: 32 Each Programmable
Dereeler Control: 6 Std. Ports for Hysteresis Control
Wire Guide Assembly: 6 Eyelets Mtd. to Bar, Straight Std', 90º - Optional
Compressed Air: 60 PSI req'd
Dimensions: Dp: 60", W: 36", H: 60"/ Weight 1400 lbs.
Dead Posts: Wire Retention
Rotating Tail Stock: Optional
Also Available in 2, 3, 4, 6, 8,10,12 & 18 Spindle Models.
Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 400-6 Multi-Spindle Coil Winder 6 Spindles, and may change due to design changes which may be incorporated.