Model 100 Programmable Coil Winder

Itasca Model 100 Programable Coil WinderItasca Automation Systems Model 100 Programmable Coil Winder is perfect forcompanies requiring quick change over, program storage for multiple programs, job shops running multiple varieties of coils, or labs developing new coil proto-types. The Model 100 is a fully programmable embedded PC, capable of performing the most complex programming requirements.

Technical Data

Spindle Speed: 0-12,000 RPM (optional to 15,000 RPM)
Spindle Power: Brushless Servo Motor
Wire Size: 52 AWG, .020 mm –14 AWG, 1.6 mm std.
Pitch Resolution: .00001" (01 mils)
X Axis Travel: 3.2" (83.3 mm) std.6" optional
X Axis Speed: 300"/minute max(127 mm/sec)
X Axis Position Resolution: .001" (1 mil)
Motor-Spindle Ratio: 2.66 to 1 high,1.263 to 1 low (optional to 1 to 2.486)
Spindle Stop Position: .45˚ increments programmable1 turn = 800 counts
Maximum Rotation Diameter: 4.5"(114.3 mm)
Tail Stock: Std. closed: .75" – 4.75"(19 mm-120.6 mm) max. open: 8.5"(215.9 mm)
Power Supply: 120 VAC 60 HZ
Storage Capacity: 3,500 lines of code
Interface: RS-232 for use with PC
Monitor: Backlit LCD display:1/18" x 5.75" (30 mm x 146 mm) 4line x 40 CRT
Keyboard: Tactile touch membrane
I/0 points: 8 each std., 16 optional: User Programmable
Dereeler Ports: 2 std. programmable: tension & wire break, (4 optional)
Wire Guide Assembly: Eyelet or pulley
Dimensions: 19" W (482 mm) x 20" H (508 mm) x 20" DP (508 mm)
Weight: 75 Lbs. (34 kilos)
Guard: Programmable to initiate cycle start and stop
Programming: Menu type (or download from PC)
Foot Pedal Control: 1 port std. (pedal optional)

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 100L Programmable Coil Winder, and may change due to design changes which may be incorporated.