Model 400-4HD Multi-Spindle Coil Winder 4 Spindles with dual wire

Itasca Model 400-4 HD Programable Coil WinderThe Itasca Systems, Inc. Model 400 -4HD multi-axis spindle winder is one of the most durable and competitively priced coil winders in the industry, capable of performing the most complex programming requirements.

Dedicated Systems

The series 400 is part of Itasca's expanding line of winding equipment, including everything from bench models to complete dedicated systems.

Technical Data

Spindle Speed: 0-3,000 RPM (optional to 12,000 RPM)
Spindle Motor Power: 150 lbs. in @ 3000 RPM
Spindle Stop Position: 800 @ (.45º)
Wire Size: 14 AWG - finest
Pitch Resolution: 0 to full traverse / turn
X Axis Travel: 5.00" Speed: 500" / min.
Y Axis Travel: 4.75" Speed: 500" / min.
Z Axis Travel: 3.75" Speed: 500" / min.
Maximum Rotation Diameter: 4.5" (114.3mm)
Distance Between Center: 4.5" Std.
Power Supply: 220/440 VAC 60 HZ 3PH
Storage Capacity: 10 GB Hard Drive
Interface: RS-232 for printer, PC or Dumb Terminal, Networkable
Monitor: 14" Color Super VGA
Keyboard: Standard 101
Control: PC Based w / DSP Motion Control - CoilPro
I/O Points: 32 Each Programmable
Dereeler Control: 4 Std. Ports for Hysteresis Control - or Serial RS232
Wire Guide Assembly: 4 Eyelets Mtd. to Bar, Straight Std.' 90º - Optional
Compressed Air: 60 PSI req'd
Dimensions: Dp: 60", W: 36", H: 60"/ Weight 1400 lbs.
Dead Posts: Wire Retention - J Clamp
Guard: Locking
Cutters: Optional
Rotating Tail Stock: Optional
Wire Change: Optional

Also Available in 2, 3, 4 Spindle Models.

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 400-4HD Multi-Spindle Coil Winder 4 Spindles with dual wire, and may change due to design changes which may be incorporated.