Model 400-4 Multi-Spindle Coil Winder 4 Spindles

Itasca Model 400-4 Programable Coil WinderThe Itasca Systems, Inc. Model 400-4 multi-axis, multi-spindle winder is one of the most durable and competitively priced coil winders in the industry, capable of performing the most complex programming requirements.

Dedicated Systems

The series 400-4 is part of Itasca's expanding line of winding equipment, that can be incorporated into a complete dedicated winding system.

Optional Accessories:

  • Shuttle Load/Unload
  • Rotating Tail Stock
  • Programmable Dead Post
  • Wire Change
  • Wire Cutters
  • 90º Wire Wrap
  • Heavy Duty Drive for 18 to 52 AWG

Technical Data

Spindle Speed: 0-12,000 RPM STD 0-18,000 RPM Optional
Spindle Motor Power: 14 Ft. lbs. @ 6000 RPM 2.76 Hp.
Spindle Stop Position: 800 @ (.45º)
Wire Size: 52 AWG - 16 AWG
Pitch Resolution: 0 to full traverse / turn
X Axis Travel: 5.00" Speed: 500" / min.
Y Axis Travel: 4.75" Speed: 300" / min.
Z Axis Travel: 3.75" Speed: 300" / min.
A Axis Travel: 5.00" Speed: 300" / min.
B Axis Travel: 4.75" Speed: 300" / min.
C Axis Travel: 3.75" Speed: 300" / min.
Maximum Rotation Diameter: 4.5" (114.3mm)
Distance Between Center: 4.5" Std.
Power Supply: 220/440 VAC 60 HZ IPH
Storage Capacity: 500 MB Hard Drive
Interface: RS-232 for printer, PC or Dumb Terminal, Networkable
Monitor: 14" Color Super VGA
Keyboard: Standard 101
Control: PC Based w / DSP Motion Control
I/O Points: 24 Each Programmable
Dereeler Control: 4 Std. Ports for Hysteresis Control
Wire Guide Assembly: 4 Eyel'ts Mtd. to Bar, Straight Std., 90º - Optional
Compressed Air: 60 PSI req'd
Dimensions: Dp: 60", W: 36", H: 60"/ Weight 1400 lbs.
Dead Posts: Wire Retention
Guard: Locking
Cutters: Optional

The Itasca Systems Multi-Spindle / Multi-Axis Coil Winder Model 400 Series
Also Available in 2, 3, 4, 6, 8,10,12 & 18 Spindle Models.

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 400-4 Multi-Spindle Coil Winder 4 Spindles, and may change due to design changes which may be incorporated.