Model 400-3 Multi-Spindle Coil Winder 3 Spindles

Itasca Model 400-3 Programable Coil WinderThe Itasca Systems, Inc. Model 400-3 multi-axis, multi-spindle winder is one of the most durable and competitively priced coil winders in the industry, capable of performing the most complex programming requirements. The 400-3 is part of Itasca's expanding line of winding equipment, that can be incorporated into a complete dedicated winding system or tooled for multiple jobs with quick change over.

The Itasca Systems Multi-Spindle / Multi-Axis Coil Winder

Picture right is tooled for multiple taps with tape between. The Itasca Systems Multi-Spindle / Multi-Axis Coil Winder

Optional Accessories:

  • Shuttle Load/Unload
  • Rotating Tail Stock
  • Programmable Dead Post
  • Wire Change
  • Wire Cutters
  • 90º Wire Wrap
  • Heavy Duty Drive for 18 to 52 AWG

Technical Data

Spindle Speed: 0-8,000 RPM
Spindle Motor Power: 5.1 Ft. lbs. @ 5000 RPM 3.8 Hp.
Spindle Stop Position: 800 @ (.45º)
Wire Size: 52 AWG - 14 AWG
Pitch Resolution: 0 to full traverse / turn
X Axis Travel: 5.00" Speed: 250" / min.
Y Axis Travel: 4.75" Speed: 250" / min.
Z Axis Travel: 3.75" Speed: 250" / min.
A Axis Travel: 5.00" Speed: 250" / min.
B Axis Travel: 4.75" Speed: 250" / min.
C Axis Travel: 3.75" Speed: 250" / min.
Maximum Rotation Diameter: 6.0" (152.4mm)
Distance Between Center: 6.0" Std.
Power Supply: 240/480 VAC 60 HZ 3PH
Storage Capacity: 10 GB Hard Drive, min.
Interface: RS-232 for printer, PC or Dumb Terminal, Net workable
Monitor: 14" Color Super VGA
Keyboard: Standard 101
Control: PC Based w / DSP Motion Control
I/O Points: 32 Each Programmable
Dereeler Control: 4 Std. Ports for Hysteresis Control' Wire Guide Assembly: 3 Eyelets Mtd. to Bar
Compressed Air: 60 PSI req'd
Dimensions: Dp: 60", W: 36", H: 60"/ Weight 1400 lbs.
Dead Posts: Wire Retention
Guard: Locking
Cutters: Optional

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Model 400-3 Multi-Spindle Coil Winder 3 Spindles, and may change due to design changes which may be incorporated.