Air Brake Heavy Duty 24"& 30" Spool Dereeler

Itasca Air Brake Heavy Duty Spool DereelerThe base unit consists of a Heavy Duty welded frame with bearing mounted shaft. Spool is loaded onto the shaft and secured with a T-nut. The tensioner is capable of handling both the 24" and 30" spool with round, square or flat wire.


The Dereeler tension device is a air actuated caliper brake gripping a 12" diameter disc. Tension is controlled by an adjustable air regulator with a shut of valve. (optional Analog Control)

Floor Mount

Larger gages of wire are usually sold in larger packs. Dispensing of Spools can best be accomplished using the Floor Mount Model. Placement of Dereeler could be behind winder or behind the operator if hand winding.

Optional Feature

Analog Control of tension from winder if capable of 0-10 Vdc Output.
Other sizes will be quoted upon request.

Technical Data

Spool Size: 24" & 30" Diameter
Max Tension: 50 Ft. Lbs.
Air Required: 80 Psi. Min.
Max. Spool capacity: 30" spool x10"width
Spool hole size: 1 1/4"-2 1/2" Dia.
Shaft to Floor: 16.0"
Max Spool Weight: 500 Lbs.
Dimensions: 20"Wx21"Hx34"L
Weight: 125 Lbs.

Photographs and information featured on this page depict a typical ITASCA SYSTEMS, INC. Air Brake Heavy Duty 24"&30" Spool Dereeler, and may change due to design changes which may be incorporated.